Torque Tool Testers Series TT02
Tình trạng: Mới 100%
Bảo hành: 12 tháng
Xuất xứ: USA
Series TT02 Torque Tool Testers present a simple and accurate solution for testing manual, electric, and pneumatic torque screwdrivers, wrenches, and other tools. These testers are compact and rugged, suitable for production environments. A universal 3/8” square receptacle accepts common bits and attachments. The TT02 captures peak torque in both measurement directions, and also calculates 1st and 2nd peaks, useful for click-type tools.
A blazingly fast sampling rate of 7,000 Hz and accuracy of ±0.3% produce reliable and consistent test results. The TT02 includes a range of sophisticated productivity-enhancing features, including USB, RS-232, Mitutoyo, and analog outputs, automatic data output/zeroing/data storage upon tool slip or click, memory storage for 1,000 readings, pass/fail indicators and outputs, and more. Password protection is provided to prevent unauthorized changes to settings and calibration.
Series TT02 testers include MESUR™ Lite data acquisition software. MESUR™ Lite tabulates continuous or single point data. Data stored in the TT02’s memory can also be downloaded in bulk. One-click export to Excel allows for further data manipulation.
Note: Not for use with impact tools.
Accuracy: ±0.3% of full scale
Sampling rate: 7,000 Hz
Power: AC or rechargeable battery. Multi-step low battery indicator is displayed, tester shuts off automatically when power is too low.
Battery life: Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Measurement units: ozFin, lbFin, kgFcm, Nm, Ncm
Output: USB / RS-232: Configurable up to 115,200 baud.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VDC, ±0.25% of full scale at capacity,
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Configurable settings: 1st/2nd peak, digital filters, outputs, automatic shutoff, default settings, key tones, backlight, audio alarms, passwords, calibration
Safe overload: 150% of full scale (display shows “OVER” at 110% and above)
Weight: 5.8 lb [2.6 kg]
Included items: 1/4” hex to 3/8” square adapter, universal voltage AC adapter, battery, quickstart guide, USB cable, resource CD (USB driver, MESUR™ Lite software, MESUR™gauge and MESUR™gauge Plus 90-day trial, and user’s guide), and NIST-traceable certificate of calibration (cert with data is available for an additional charge).
Environmental requirements: 40°F – 100°F [5°C – 45°C], <96% humidity (non-condensating)
Warranty: 3 years (see individual statement for further details)
Vui lòng gọi Ms. Sương 0967910679
Sản Phẩm Mark-10:
Torque Tool Testers Series TT02-Bộ Kiểm Tra Lực Mô Men Xoắn TT02 Mark 10 vietnam
- Ametek Land
- As Schoeler
- Beijer Electronics
- DAIICHI Electric
- Enderess + Hauser
- FOTOELEKTRIK PAULLY
- IPF Electronic
- KELLER ITS
- STI VIBRATION MONITORING
- Seojin instech
- TDK Lambda
- YOUNG TECH
- Wise Control