Module I/O beckhoff, EKM1101 EtherCAT Coupler with ID switch and diagnostics, beckhoff vietnam

Mã sản phẩm:

EKM1101

Mail:

sale04@tmpvietnam.com

Xuất Xứ:

Germany

Chia sẻ:

Số lượng

Chi tiết sản phẩm

Module I/O beckhoff, EKM1101 EtherCAT Coupler with ID switch and diagnostics Việt Nam

The EKM1101 EtherCAT Coupler connects the ELMxxxx EtherCAT measurement modules with EtherCAT. A station consists of an EKM1101 coupler, any number of EtherCAT Terminals and a bus end cap or an EtherCAT extension such as EK1110 or EK1122. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. The EKM is designed in particular to meet the needs of high-precision analog measurement technology, e.g. with ELM3xxx terminals: to reduce interference in the connected measurement technology, both the E-bus supply U_S and the 24 V power contact supply U_Pare electrically isolated and filtered in the coupler.

Technical data	EKM1101
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks, with identity verification
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Number of configurable IDs	256
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Bus interface	2 x RJ45
Power supply	24 V DC (-15 %/+20 %)
Current consumption E-bus	–
Current consumption from US	50 mA + (∑ E-bus current/4)
Current consumption from UP	50 mA + load
Current supply E-bus	2000 mA
Power contacts	max. 24 V DC/max. 2 A
Special features	electrically isolated output voltages, reverse polarity protection, diagnostics of supply and output voltages
Electrical isolation	500 V (power contact/supply voltage/EtherCAT)
Weight	approx. 450 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE