Bộ Điều Khiển Lực Căng TC920V Nireco-Nireco VietNam-TC920V Nireco

Xuất Xứ:

Japan

Chia sẻ:

Số lượng

The TC920V Tension Controller can be used with a wide range of web manufacturing and treatment processes to automatically control the tension of a moving web to a constant value. Digital calculation allows a wider range of functions than previous products, but the controller can still be operated in the intuitive style of an analog device. This controller combines stable and precise tension control with excellent cost performance.

Bộ điều khiển lực căng TC920V_compressed

Specifications

Power supply voltage			100 to 240V AC 50/60Hz
Power consumption			300VA (Entry cuurent 60Atyp (20ms))
Current capacity			1.5A (200V)
Mass			6kg
Environment	Operating ambient temperature		0 to +50°C
	Operating ambient humidity		35 to 85%RH (no condensation)
	Vibration resistance		3.5mm, 1G, 3 to 150Hz, 3 directions (for one hour)
	Power source noise		2kV, normal mode, pulse width of common mode 50 nS, 1 uS (depends on the noise simulator)
	Operating ambient atmosphere		Place free from water droplets, inflammable gas, corrosive gas, corrosive gas, and dust
Rated tension			10～10000N
Tension sensors that can be connected to the TC920V			MB, MG, MC, CD, MJ, CJ, TSA, and intrinsically safe TSA tension sensors.
Output	Output for measurement		Tension value voltage output (0 to 10VFS (1 mA or less)) Current output for tension value meter (0 to 1mA/FS)
	External setting power supply		0 to 10V (1 mA or less), 4 to 20mA (470Ω or less) 0 to 24V (4A or less)
	Power supply for external setting		Power supply for external setting
	Contact output	Zero tension output Minimum diameter output Automatic control output	Number of outputs, 3 (DC30V 0.2A, AC200V 0.2A)
Input	Sensor input		•MG tension sensor •MB tension sensor •MC tension sensor •CD tension sensor •MJ tension sensor •CJ tension sensor •TSA tension sensor
	Analog input		•External tension setting •External manual tension setting	A number of inputs, 2 (0 to 5V, input impedance 100kΩ）
	Analog input		•Analog diameter (for Taper and Start level) •New spindle deameter (for splicer) •External start level setting •External taper rate	A number of inputs, 4 (0 to 10V, input impedance 100kΩ）
	Contact input		•Automatic •Memory reset •Accelerate/decelerate •Splice •Output on •Emergency stop, external automatic / manual or accelerate •Diameter calculation reset •Diameter calculation hold	A number of inputs, 8 (12V DC, 12mA)
	Pulse generator Gate generator	Detection for speed and diameter	12V DC