Thiết bị đo lực series 4 mark-10 vietnam
Series 4 digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500 N). The gauges feature a sampling rate of 3,000 Hz, producing accurate results under a wide range of test conditions. Accuracy is ±0.2% of full scale, and resolution is 1/2000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges’ many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.
On-board data memory for up to 50 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 200% of capacity, and an analog load bar is shown on the display for graphical representation of applied force.
An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 4 digital force gauges are directly compatible with Mark-10 test stands, grips, and software. The force gauges are directly compatible with Mark-10 test stands, grips, and software.
The gauges include MESUR™ Lite data acquisition software. MESUR™ Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.
Accuracy: ±0.2% of full scale
Sampling rate: 3,000 Hz
Power: AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Measurement units: lbF, ozF, gF, kgF, N, kN, mN (depending on model)
Outputs: USB / RS-232: Configurable up to 115,200 baud.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VDC, ±0.25% of full scale at capacity,
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Safe overload: 200% of full scale (display shows “OVER” at 110% and above)
M4-012 - M4-100: 1.0 lb [0.45 kg]
M4-200 - M4-500: 1.2 lb [0.54 kg]
Warranty: 3 years (see individual statement for further details)
Công Ty TNHH Thương Mại Và Dịch Vụ Tăng Minh Phát (TMP) là nhà phân phối thiết bị của hãng Mark-10 tại Việt Nam.
Hãy liên hệ với chúng tôi để có thể hỗ trợ bạn tốt nhất!
Huỳnh Công Chính (Mr)
Advanced Digital Force Gauges Series 4 Mark 10-đại lý mark 10 tại vietnam
- Ametek Land
- As Schoeler
- Beijer Electronics
- DAIICHI Electric
- FOTOELEKTRIK PAULLY
- IPF Electronic
- KELLER ITS
- STI VIBRATION MONITORING
- Seojin instech
- TDK Lambda
- YOUNG TECH
- Wise Control
- CS instruments